*LGE KitKat Additional Documentation for PurpleDrake Mod for LGE Optimus LTE3 and Vu2

1. 개요 INTRODUCTION

 

Optimus LTE3, Optimus Vu2는 시스템이 시작할 때 /system/etc/install-recovery.sh 를 실행하지 않도록 설계되었습니다. 따라서, 이와 같은 설계를 우회할 수 있도록 루트 도구를 특별하게 설계해 주어야 하는데, 이러한 배려를 한 루트 도구는 현재 나와 있지 않습니다. 그러므로 기존의 루트 도구 중 ‘PurpleDrake’를 조금 변경하여 위 2개 디바이스에서도 정상적으로 루트 권한을 취득할 수 있도록 하는 파일을 배포합니다.
Optimus LTE3 and Optimus Vu2 does not automatically run /system/etc/install-recovery.sh which is crucial for SuperSU (and root binaries) to work. Therefore it is necessary to feed the device with an alternative startup script that provides proper SuperSU functionality. This mod enables the PurpleDrake tool to install a special set of files designed for these two device models.

 

 

2. 다운로드 DOWNLOAD

 

다음의 위치에서 파일을 다운로드하십시오: permaroot.bin

 

 

3. 사용 방법 USAGE

 

이 파일을 사용하려면, PurpleDrake가 내장하고 있는 permaroot.bin 파일을 여기서 다운로드한 것으로 교체하면 됩니다. 상세한 방법은 다음과 같습니다.

 

(1) 만일 아직 PurpleDrake를 다운로드하지 않았다면, 지금 다운로드하십시오.

If you have not downloaded PurpleDrake yet, download it now.

(2) 다운로드한 PurpleDrake의 압축을 풀고, ‘assets’ 라는 이름의 폴더가 있는지 확인합니다.

Unpack the PurpleDrake package file you downloaded, and check if you see a folder named ‘assets’.

(3) 이 폴더 안에 permaroot.bin 파일이 있을 것입니다. 이 파일을 지우고 여기서 다운로드한 것으로 교체하십시오.

Inside this folder you will see a file named ‘permaroot.bin’. Delete this file, and replace it with the one you downloaded here.

(4) 최종적으로 purpledrake_windows.bat를 실행하여 화면의 안내에 따라 디바이스를 루트합니다.

Finally, run purpledrake_windows.bat to root your device.

Advanced System Enhancement Pack